Re: NOS front bumper (long post)

[Schuyler Wrobel <schuyler62@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Claim your fully stuffed Christmas Stocking now
caacQ4Sb7yoMza/PermissionData
-------------------------------------------------------------------

oh yeah, some tips, a steel workers wrench works good for alining bolt 
holes.
all the brackets should be loose that should get you an 1/8" right 
there.
and make sure everything is loose up front if your going to be banging 
on the frame
rails, especially the radiator, first whack split the newly soldered 
seem on mine, do-uh (o:
but a quick trip back to the radiator shop and they fixed it for free, 
scratching their heads.(o:

Schuyler

hey Paul, am I still cracking you up? (o:

Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
 <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
On Nov 28, 2004, at 4:02 AM, Schuyler Wrobel wrote:
> Hmm... maybe 62s are different bumper wise, but I stretched the bumper 
> on my car?
> It's been hit a couple times, so twists, yes it's twisted, frame 
> abnormalities? yes, both
> frame ends look like they were used as battering rams, had to take a 
> sledge to one side.
> The replacement bumper had it's own bend to it also. An 1/8" would of 
> been easy, but
> then again, I've been jamm'in square pegs in round holes for a long 
> time,(o; seems like
> nothing ever wants to fit. Although both fenders I replaced went on 
> without a hitch!
> go figure ?
>
> Your friendly neighborhood, ham fisted, shade tree mechanic (o:
> Schuyler
>
> Schuyler 62 Dodge Dart 440 wagon w/ Poly 318
>  <http://www.1962to1965mopar.ornocar.org/ml-wrobel62.html>
>
> On Nov 27, 2004, at 7:21 PM, Tom Duross wrote:
> > -----------
> >
> > Mike, I learned a bit about bumpers with my first 65 a couple of 
> > years ago.
> > I bought a set of triple played guaranteed show quality (yada yada) 
> > bumpers
> > from a great company in NJ.
> > I still have them and the chrome is almost liquid it's so nice.
> > Well, I tried to bolt them on and they were like something from 
> > another
> > model.  They were close,
> > but not right on and bumpers do not stretch, tweak or move.  If it's 
> > off a
> > 1/8", it might as well be off an 1".
> > I talked to a few body folks and they said they always have the 
> > originals
> > done for just that reason.
> > Bumpers get personalized by the card they're attached to.  Slight 
> > twists,
> > frame abnormalities, defects;
> > all effect the way a bumper fits a car and if you're fortunate enough 
> > to
> > have the originals on your car,
> > get them done and don't use replacements.  I tried a cum-a-long, a 
> > tire
> > against a tree trunk, holding the car in gear;
> > nothing would make these fit.  I was very disappointed because they 
> > cost me
> > 500 each.  I was and still plan to make
> > a bar out of them along with a front clip one day and make all the 
> > lights
> > work.  It might have been my car, I don't
> > know but it was super straight and from the south and out of storage. 
> >  I
> > tried a whole weekend to make them fit.
> > The cars in storage now along with a twin for a later project and 
> > those
> > beautiful bumpers are all wrapped up
> > in my cellar waiting for the day I make my Mopar Bar or MoBar.  The 
> > platers
> > are on Ebay from time to time and only
> > do bumpers and give a lifetime guarantee.  I can look them up if you 
> > want.
> >
> > Tom
> >
> > -----Original Message-----
> > From: Dodger7998@xxxxxxx [mailto:Dodger7998@xxxxxxx]
> > Sent: Saturday, November 27, 2004 10:03 PM
> > To: 1962to1965mopars@xxxxxxxxxx
> > Subject: Re: NOS front bumper (long post)
> >
> >
> > It's only NOS untill it is bolted down, and if it is already flaking, 
> > chance
> > are it will get worse

[AD removed for archives]
-------------------------------------------------------------------
We can reduce your unsecured credit card debt by 40-60%. 
Don?t file bankruptcy.  Be Debt Free in as little as 1 year. Take 
control of your situation.  100% FREE Consultation.
caacSn6b7yoMzf/KnockOutDebt
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


b7yoMz.