engine rebuild questions

[laborboy@xxxxxxxxxx]

-----------------------------------------------------------
NEW Heat-sensitive Hypercolor Thinking Putty from Crazy 
Aaron comes in grown up handfuls. It's the creativity 
unleashing, desk toy that changes color when you touch it!
caaciqRb7yoMza/Crazy Aaron's Puttyworld
-----------------------------------------------------------


Putting my 383 long block together and have a couple questions for the 
resident experts:

1. oil pan gasket, Felpro. When I torqued it to about 12 ft lbs, the 
gasket at the bolts squeezed out about 1/8 inch. this looked scarey to 
me, so I didn't torque to the recommended 15. maybe my torque wrench 
needs to be recalibrated. is this amount of gasket unusual? (I did use 
blue silicone on both sides)

2. is oiling the touching metal parts enough, or do I need to put cam 
grease on them (such as where the fuel pump lever touches the actuator 
rod.

Thanks for help. More to come, I'm sure. 

Zack

-----------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today ? APPLY NOW! It's fast, easy and 
secure. 
caaciqQb7yoMzf/Discover Card
-----------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



b7yoMz.