Re: {Chrysler 300} Dipstick needed

On Mon, Oct 12, 2026 at 7:14 PM 'Keith Langendorfer' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Hey Folks

Looks like the replacement dipstick (thin and with a twist) in our newly rebuilt Crossram K engine has the gradations in the wrong places so I’m wondering if anyone has one that will work.

What I need is a dipstick that:

- has a total length of around 22.5”, measured from the top of where the dipstick “seats” in the top of the tube to the tip of the dipstick (a little longer would be okay);

- has the “full line” about 20.5 - 21” down from the top of that “seating lip”.

I see there’s a bunch online but they don’t show the detail on the gradations (the one that I have now reads too low with a full crankcase but the “thicker and non twisted” dipstick out of our F reads more accurately.)

BTW, I don’t feel like changing the tube so I’m just looking for a dipstick that works.

Thanks in advance,

Keith

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/4FB12BA5-4149-4071-9A99-0D080C18E6B0%40yahoo.com.