Re: {Chrysler 300} 1962 Heater & A/C Box Polishing

["'ALLAN POZDOL' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hi Matt,

 

Not sure what your setup looks like, but my 64 was pretty grungy. I just wiped it down until clean with garage wipes, Tub O Towels and ZEP. Be sure to rinse off with water, and I just polished it up with an old T shirt.

 

 For more shine, I guess a UV resistant wax would seal it up.

 

To shine the old plated metal up, I use SIMICHROME polish and then sealed the metal with an aircraft anti corrosive spray ACF-50.

 

This really cleans up door latches like new as well. Any plated metal part then looks like new! See the fuel line?

 

Allan

On 05/16/2026 3:41 PM CDT 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

 

 

Who likes what method to make the fiberglass(?) boxes look nice and clean and shiny?

 

Thanks!

Matt Allyn

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/E89B5D41-4E35-4D4D-96E7-6AC16033FE28%40yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/2067665460.51329.1778981993849%40connect.xfinity.com.
Due to an email security policy, an attachment named Heater.zip was removed from this message.

Should you have any questions, please contact your mail administrator for more information.