{Chrysler 300} AFB phenolic carb spacer

["'ALLAN POZDOL' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Greetings, All,

 

I wanted to share a source I came across for phenolic carb spacers that fit our dual sized throttle bodies.

 

I just bought a 1/4" phenolic spacer for my K and find it is a perfect fit. They also make a 1/2" thick spacer as well.

 

My K was a Colorado high elevation car and when I first got it, I found it had a near 1/4" solid gasket mounted with a .010" two hole gasket on top. It was pretty collapsed, but this phenolic one should hold up to keep those circuits open.

 

I haven't run it as of yet as my engine is still in the machine shop. Still.

 

He has them for WCFB Tea Kettles as well, as many others.

 

https://www.dashman.net/category.php?id=13&pager=4

 

Allan

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1947897791.343604.1759680986686%40connect.xfinity.com.