i do not think that comes apart , if a bad hose maybe use brass tubing pieces to couple new ones , otherwise use as it is . Amazon sells a package of various size brass tubes about a foot long , good to have anyway On this , first never wiggle that block trying to get it off , that breaks off the small plastic nipples Second coat rods of actuators with silicone grease , rubber gets hard where they exit the can , you get a vacuum leak , slow or intermittent action results . Cannot get new stuff , cant open can to fix either. There is a tiny hole in the bottom of vacuum inlet line slows flow . Not sure a good idea but when combined with slight leaks it does not move right Maybe it woukd slam withiut the restriction . All by way of heads up j On Sep 16, 2025, at 12:07 AM, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote: -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/C6BAF9F8-69BF-4983-872D-069A21D1293C%40gradyresearch.com. |