Re: {Chrysler 300} 1962 Gauges

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

It means your voltage limiter isn't working or you have a short in a sender wire. Would be unusual to have a short in both of them.

Did the fuel gauge peg as well? You can ruin the gauges leaving them like that.

On Fri, Feb 14, 2025 at 11:03 AM 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

What does pegged sign mean…

When you turn on the ignition?

Matt Allyn

(562) 533-2551

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/2139492039.314510.1739559823566%40mail.yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFMg45gaoTifp3erLciEZmmS5pvTuEH%3Dt0tptx-_YcoU3A%40mail.gmail.com.