Re: {Chrysler 300} Putting a square peg in a round hole

[Bob Merritt <bob@xxxxxxxxxxxxx>]

I'll chime in with one of my square peg experiences.

I was working on the rear bumper of a 64. I had it off for

re-chrome. That alone took 3 months. When I went to install it,

time had passed so I forgot "the trick". I installed

the bumper, shimmed it for near perfect alignment and was

pretty pleased. Then I went to install the back up lights.

Whoops. The back up lights must be installed in the bumper

before the bumper is installed on the car.

Everything I do I do twice.............and sometimes more than twice.....



--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/80033a76-452e-e057-8bbd-97bb7b342804%40simplexco.com.