Re: [Chrysler300] Door pillar strikers

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Mild heat too if car not newly painted -propane - put blue tip of flame on screw as long as prudent , then very large Philips screwdriver sharp rap with hammer . You do have the big size screwdriver right ? Forget it with the usual #2 . Fought this on trunk latch once , 57? 

Sent from my iPhone not by choice 

> On 17 Feb 2020, at 2:39 pm, finsruskw@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> Removing  the rear seat ¼ panel will give access to the threads on the back side of the door jamb.
> 
> Try some rust penetrant there.
> 
> Have you already screwed up the Phillips slot/s ??
> 
> If so, try center drilling the screw so the driver will sit deeper.
> 
> I probably have some used screws to replace damaged ones assuming you can get them out.
> 
> Good luck!
> 
> 
> 
> From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Cox Scooter465@xxxxxxx [Chrysler300]
> Sent: Monday, February 17, 2020 1:23 PM
> To: dave.dumais@xxxxxxxxx
> Cc: Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>; bob@xxxxxxxxxxxxx
> Subject: Re: [Chrysler300] Door pillar strikers
> 
> 
> 
> 
> 
> I would try a steel head Phillips screw driver.
> 
> Give each screw some
> 
> Heavy strikes. It will break
> 
> Rust loose from threads
> 
> May work.
> 
> 
> 
> Bob Haag
> 
> 
> 
> 
> 
> On Feb 17, 2020, at 12:47 PM, Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
>    
> 
> Need help on the Coupe door pillar strikers.
> 
> 
> 
> 3 Philips head screws, even an impact driver won't crack them loose.
> 
> 
> 
> Any experience or suggestions?
> 
> The door is adjusted for gaps.
> 
> But, it will not shut into striker by 3/16.
> 
> 
> 
> Thanks,
> 
> 
> 
> Dave
> 
> Sent from Yahoo Mail on Android <https://overview.mail.yahoo.com/mobile/?..src=Android> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> Posted by: <finsruskw@xxxxxxxxxxxxxxx>
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 


------------------------------------
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/