RE: [Chrysler300] 440 Engines and Cross Rams

["'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Steve, If you are going to run cast iron J-K headers, you are in for heating
problems.

Ask me how I know this

 

Dave Schwandt

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Sandy Beard sbeard2@xxxxxxxxxxxxxxx [Chrysler300]
Sent: Thursday, November 09, 2017 2:27 PM
To: paul; Lindsey
Cc: danakolaia@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 440 Engines and Cross Rams

 






I am in the process in installing a set of rams on my F with a 440. As I was
told, they had to use my old crank shaft from my 413  to mate the engine to
the transmission. waiting on heat risers to proceed with the install..
Engines been in since 1980 and no problems with different engine so far.

Good luck !


Steve Beard

300 F 

Delaware, Ohio

  _____  

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of
Lindsey lindsey@xxxxxxxxxxxxxxx [Chrysler300]
<Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: Thursday, November 9, 2017 1:01 PM
To: paul
Cc: danakolaia@xxxxxxxxx; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] 440 Engines and Cross Rams 

 

  

Forgot to mention, mine is coupled to a '62 transmission. Nothing special to
connect that I am aware of.

Sent from my iPad


On Nov 9, 2017, at 11:38 AM, paul paulholm@xxxxxxxxxxxxx [Chrysler300]
<Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

On 11/9/2017 12:20 PM, danakolaia@xxxxxxxxx [Chrysler300] wrote:

> Has anyone out there used the Cross Ram setup with a 440 engine? Are
> there any potential issues to be considered? Thanks!

remember this, the tides of marching onward and upward are often
hampered by the special crossram cam needing special attention
to the CAM TIMING as others have oft repeated in this forum.

Typing that, someone 15 or so years ago added FI bungs to a set
of crossram mannyfolds and made that run.

the 440 block has been done several times with cross rams, the extra
cubics dont hurt as I understand it.

-- 
Paul Holmgren
The history of liberty is a history of resistance.
The history of liberty is a history of limitations
of governmental power, not the increase of it.
- Woodrow Wilson, New York, September 9, 1912










[Non-text portions of this message have been removed]



------------------------------------
Posted by: "David Schwandt" <finsruskw@xxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/