Re: [Chrysler300] Gasket sourcing question - '60 crossram

["Robert Hayen" <robert554@xxxxxxxxxxxxxx>]

the studs that screw into to the  head that hold the exhaust manifold on . they go into the water jackets too!!!  they should have some no 2 permatext on them also.... bob hayen  406 752 5152
  ----- Original Message ----- 
  From: cpaviper@xxxxxxxxxxx 
  To: chrysler300@xxxxxxxxxxxxxxx 
  Sent: Saturday, January 26, 2013 3:05 PM
  Subject: [Chrysler300] Gasket sourcing question - '60 crossram


    


  Hello Group, 

    

  Am looking for a source of certain gaskets for my F’s 413 – 

    

  1.      Set of intake manifold gaskets – rams mounting to the heads. 

  2.      Set of 4 exhaust bypass gaskets – 2 slotted and 2 not – about 1 ½” x 3” in o.d. size. I’m told by my mechanic that these are for the exhaust passage elbow from the exhaust to the intake. We’ll fabricate these if they’re not commercially available. 

    

  It appears that the yokel who assembled the motor back in ’07, when we got it back from being rebuilt by George, siliconed the valve covers, rather than using the proper gasket installation process; along with including exhaust manifold gaskets that aren’t to be used on these motors. We’re pulling the exhaust manifolds tomorrow, and will reassemble without gaskets. I’ve also had a sporadic antifreeze leak that appears to be coming through one of the head bolts that screws all the way into a water jacket (so I’m told) – I was thinking I had a freeze plug issue, but couldn’t locate the leak’s source. And just rebuilt the P.S. pump that was leaking like a sieve.  I guess the 4,000 miles I drove the F this past summer really did it in! 

    

  Thanks! 

    

  Noel Hastalis 

  Burr Ridge, IL 

  F coupe 

    

  [Non-text portions of this message have been removed]



  

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/