RE: [Chrysler300] Starter Motor

["Tom" <tdcox@xxxxxxxxxxxxx>]

Daryl,

 

I can't answer your question about the hi-torque starter fitting the G,
although I bought one hoping it will fit. I haven't tried to put it on yet.

 

However, the problem I have had with rebuilding my starter is that the
hi-yield windings used in the older starters for the higher horse power
motors are no longer available. Once my engine gets hot, my starter (after a
rebuild) will barely turn the engine over. I am hoping the hi-torque starter
works (I called the manufacturer and asked and they said it would fit the
60/61 413's). I hope to try to put it on in the next few weeks.

 

Tom Cox

 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Daryl1086
Sent: Thursday, November 08, 2012 12:11 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Starter Motor

 

  

Does anyone know if you can install a 1962 or later Hi Torque starter motor
on a 1961 300-G. I can't seem to find any rebuilt starter motors for the 61
Chrysler any more. And the later Hi Torque starter is better. The problem
that I know of with this is that the 61 starter motor has a threaded hole
for the upper mounting bolt and the later model Hi Torque just has a hole in
it. Has anyone done this before. I know if worst comes to worst I can send
my starter motor to a motor repair shop and get it rewound.





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/