Re: [Chrysler300] 1960 Heater Hose Routing

[lettercars@xxxxxxx]

Gary and All:
Sorry to be so late getting at this.  Family activities.  I took  a lot of 
time with this when doing my 300F, and its heater does seem to work  very 
well.  I did also rebuild the control.  When it is off, there  seems to be no 
hot air that "sneaks" through, and when on provides plenty.
Anyway, will try to put the routing into words.
1.  The hose from the OUTBOARD control nipple curves down and inboard  
around the heater housing and
    attaches to the nipple "under" the heater  housing.
2.  The hose from the INBOARD control nipple is routed towards the  right 
side fender inner, where it is 
    clipped, and continues on over the generator to the  REAR water pump 
nipple.
3.  The hose from the farthest inboard (highest as well) heater  housing 
nipple is routed across the top of the
    engine, curving around the right side of the coil  and connecting to 
the FRONT water pump nipple.  
Hope this is clear enough.  Feel free to ask for any clarifications as  
needed.
300ly, Gil Cunningham
 
 
In a message dated 7/18/2012 10:10:56 P.M. Eastern Daylight Time,  
moparfan@xxxxxxxxxx writes:

I need a  little help verifying which the routing of the heater hose for 
the 413 engine,  without a/c. The TSM doesn't show it. I've looked through 
dozens of photos of  club member's engine bays and I see a lot of 
inconsistencies: some go one way,  some go another.

Here goes. On the heater box on the firewall there are  four hose 
connections. Two of them get connected together with a one-foot  piece of hose. The 
remaining two get connected to the two nipples on the water  pump housing. 
Here is pic of the top of a water pump housing.  http://tinyurl.com/86re98p 
OK, the photo is actually of a later 440 housing,  but the hose routing is 
identical.

The question is, which which  connection on the heater box goes to which 
connection on the water pump?  Passenger side of heater box to water pump 
nipple closest to fan  blades?

I'd especially like to hear from someone who can tell me which  side is the 
inlet and which is the outlet of both the water pump and heater  box.

Thanks,
Gary



------------------------------------

To  send a message to this group, send an email  to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send  an email to bob@xxxxxxxxxxxxx or
go to  http://autos.groups.yahoo.com/group/Chrysler300/join and select the 
"Leave  Group" button

For list server instructions, go to  
http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to  
http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups  Links






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/