[Chrysler300] Power top pumb and motor

[RWestra@xxxxxxx]

Thanks to all who provided insight on how to get my top working again.  All 
the air is removed and the top now goes up and down smoothly.
 
Based on your input this is the procedure I used:
 
With the top lowered I filled the reservoir and raised and lowered the top.
While the top was down I refilled the reservoir then raised and lowered the 
top again.
I filled the reservoir and completed this process, filling the reservoir 
each time the top was      lowered.
I repeated this at least 6 times until the reservoir remained full with the 
top lowered. 
 
I was amazed at the amount of fluid it took to refill the reservoir after 
each cycle.  However, it does make sense that when the air is expelled it 
must be replaced with fluid.  
 
Thanks again for all the advice. 
 
                                                                        
Rolland Westra
                                                                        
Rockford, IL

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/