
Re: [Chrysler300] 300 G Exhaust
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] 300 G Exhaust
- From: pffkllc@xxxxxxx
- Date: Tue, 10 Jul 2012 07:13:44 -0400 (EDT)
When I bought my exhaust system for the G from Eileen, the driver's side
pipe leaned up against the torsion bar. We heated it an hammered it until
it was maybe 2" away. I called Eileen to let her know and suggested that
they adjust the program they were using to shape the system, and she referred
me to the shop that was doing the pipes for her. I don't remember the
name, but it was somewhere near her in the Philadelphia area. Kepich advises
me that they have never had a shop in Pennsylvania, so I doubt that they
were the makers.
Pete Fitch
In a message dated 7/9/2012 6:33:43 P.M. Eastern Daylight Time,
awrdoc@xxxxxxxxx writes:
Hi to all,
I bought a system thru Eileen and presume that Kepich did it. It was not
mandrel bent. Something that I would insist on today.
I have purchased custom mufflers from Waldron and was well pleased.
When ordering from either of these sources, you should inquire about
mandrel
bent curves for better flow. Ordering your system in stainless will be
beneficial, especially if the vehicle is stored on concrete in a cold
unheated building.
Tony Rinaldi,
300-F Conv¹t
From: Marshall Larson <_granitledge@xxxxxxxxxx
(mailto:granitledge@xxxxxxxxx) >
Date: Mon, 9 Jul 2012 11:59:19 -0500
To: Chrysler 300 Club <_Chrysler300@xxxxxxxxxxxxxxxx
(mailto:Chrysler300@xxxxxxxxxxxxxxx) >
Subject: Re: [Chrysler300] 300 G Exhaust
I believe it is a company called Kepich Exhaust that is continuing the
systems that Eileen sold.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
Chrysler300-digest@xxxxxxxxxxxxxxx
Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap