Re: [Chrysler300] Question About Dual Master Cylinder Conversion with Remote Booster?

[Paul Martin <paul_martin78ca@xxxxxxxx>]

John

I could not address the uniqueness of the power brake booster on a 300K as I have never seen one. I provided the coverage of my brake install as a reference point for others who may consider using an AAJ kit. 
I did respond to the member with the K who was wondering about the plumbing to convert to a dual master cyl. I can't see where a K would be different unless there is an hydraulic feed to the booster other than the usual vacuum lines.

Those more familiar with a K hopefully can address the booster issue.

Paul

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/