RE: [Chrysler300] torque converter

["Henry Schleimer" <henry.schleimer@xxxxxxxxxxxxxxx>]

When I got my 300C, the transmission was shot but I wanted to see if the
engine ran ok.  I removed the transmission and supported the back of the
engine under the bell housing.  The engine ran fine just with the converter
attached.  No vibration from the fluid still in the converter as it finds
its own centre (like a washing machine on spin cycle).

 

Henry

 

 

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On
Behalf Of Dave Dumais
Sent: Thursday, 5 May 2011 9:48 AM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] torque converter

 

  

Guy,s
When the auto trans is disconnected from the block and converter, is it safe
to crank up the motor?    Or does the auto trans secure the converter into
the crank shaft end?   Dave

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/