Re: [Chrysler300] rear jet removal AFB

[Bill Huff <czbill@xxxxxxxxxx>]

Why will the screwdriver not fit?  If it's a size 
issue (don't go there :-)) I would sacrifice a 
screwdriver and carefully grind one for an exact 
fit.  If the slots are already buggered beyond 
repair, drilling is the only way I 
know.  Possibly mounting the body upside down and 
working from the bottom would minimize where the chips go.

Bill Huff



At 2/6/201112:26 PM, Dave Dumais wrote:
>
>
>I am working on a AFB carb, purchased from club member, in real good shape!
>The rear jet slots will not come out.  I would 
>like to install larger jets, but am hesitating 
>to drill into the existing ones, due to not 
>removing all chips from any passages.
>
>The larger screw driver blade will not grab the 
>slots,just makes it worse.  Any thoughts on removal?
>
>Dave in mild Va.
>
>[Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/