[Chrysler300] "H" Throttle Linkage

[Matt Allyn <allynentertainment@xxxxxxxxx>]

So....
My transmission guy adjusted the carburetor to transmission linkage a few 
hundred miles ago and the car has been shifting good and hard (but not too 
hard).

Then the plastic clip that lives on top where the transmission bolts to the 
motor started to pop out of its metal housing.
I replaced the thin, old clip with a good original. (Thanks Ken!)

Now THAT clip is popping out too!
(This is the clip that holds a horizontal rod... and the linkage offshoots from 
that rod towards the carburetors AND down the firewall.)

I assume that I need to break out the shop manual and do the full linkage 
adjustment procedure from start to finish?
Any other thoughts?

Thanks!
 
Matt Allyn



      

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/