Re: [Chrysler300] 300F Water Pump

["Ron Waters" <ronbo97@xxxxxxxxxxx>]

>Upon arriving in Chicago, several guys that know a lot
more than I do about the F engine noticed that the fan pulley was not lined 
up
with the crank pulley.

IMHO, THIS is your problem. By shimming the pump, you are 'jury-rigging' the 
problem, not solving it. Notice that you weren't having water pump problems 
until after you shimmed it.

Figure out why these two pulleys are not correctly aligned and you will 
solve your problem. And pull out those shims.

Just my 2¢.

Ron 



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to http://autos.groups.yahoo.com/group/Chrysler300/join and select the "Leave Group" button

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylangYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/