[Chrysler300] Reverse Gear Problem

["Michael Reed" <mrreed@xxxxxxxxx>]

The last three times I've gotten my "F" out, the transmission is not going into Reverse gear -- until after the car has run for 2-3 minutes. Nothing happens when Reverse is selected -- no noise, nothing. Drive works normally. 

After a couple of minutes, or more, if Reverse functions normally, and does for the rest of the day. It sits for a week or more between uses.

I've checked the fluid with it running and warmed up, seems to be right at the full mark. If it were a vacuum problem, it would affect Drive, I would think, and wouldn't go away after it has run for a few minutes.

Anyone else ever experienced this? Any suggestions/ideas as to what is causing this?

Mike Reed in Lake Odessa, Michigan


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/