[Chrysler300] Trans gasket

["Vic S." <vics@xxxxxxxxxxxxx>]

           Having spent many years in dealerships, we never used any kind of
sealant. What we did do was to soak the cork gasket in water prior to
assembly, lay it on the pan, and install it. The tendency to over torque the
bolts, is what eventually causes crushing of the gasket and failure of the
seal. Follow the service manual instructions for the proper inch pound
settings for the proper torque and you should have no problems. Remember,
this is not a high pressure area.

 

   Vic  S 



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/