
[Chrysler300] Tired yet?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Chrysler300] Tired yet?
- From: "Rich Barber" <c300@xxxxxxx>
- Date: Wed, 3 Dec 2008 17:28:51 -0800
My recollection is that very few of the tires in any of these sizes vary much in DIAMETER from 27" to 30". If the tires were rigid, a 30" diameter tire would ride only 1.5" higher than a 27" diameter tire. Similar construction tires of differing sizes should be expected to have their ride height vary by one-half the difference in diameters. Radial tires do seem to squash down a little more than bias plies due to their more flexible sidewall--perhaps one half inch? I think I have seen some tire specifications that include actual revolutions per mile. Ride height would be an interesting and valuable specification, but would vary by load applied. Actual user experience when changing tire sizes and types may be the best statistic.
C-300'ly,
Rich Barber
1955 Chrysler C-300 (Shod with L78-15's OD=29.3", changed from original 8.00X15-perhaps 29.08" OD-yielding a 1 MPH error at 128 MPH)
-----Original Message-----
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Edward Mills Antique Tractors
Sent: Wednesday, December 03, 2008 4:15 PM
To: Bill Huff
Cc: Tony Rinaldi; Tom Cox; Chrysler 300 Club
Subject: Re: Re: [Chrysler300] Tires
Bill Huff wrote:
>
> Does that mean the 225s are 4" shorter in height
> (2" on top and 2" on the bottom to drop the car 2") than the 235s?
>
> Bill Huff
>
> At 12/3/200804:07 PM, Tony Rinaldi wrote:
>
> >Hi Tom,
> >
> >No one makes 235/75R14s except Coker.
> >
> >Took a pre order of 100 cars to get them to make the tires.
> >
> >The new rims are for radials.
> >
> >If you go with 225/75R14s and have Diamond Back put WWW in them your car
> >will drop almost 2†in height.
> >
> >Tony
> >
> >From: Tom Cox <<mailto:tdcox%40bellsouth.net>tdcox@xxxxxxxxxxxxx
> <mailto:tdcox%40bellsouth.net>>
> >Date: Tue, 2 Dec 2008 16:46:45 -0500
> >To:
> <<mailto:chrysler300%40yahoogroups.com>chrysler300@xxxxxxxxxxxxxxx
> <mailto:chrysler300%40yahoogroups.com>>
> >Subject: [Chrysler300] Tires
> >
> >Hi All,
> >
> >I am at a point where I need tires for the F convertible; I bought
> five rims
> >that Tony Rinaldi fixed us up with a year or so ago and they need some
> >rubber.
> >
> >I called DiamondBack (love their tires) and was told that 14‰ radiaal
> tires
> >that are available are at least 1 ∠inches shorter than our
> original tires.
> >For those that use radials, what size are you using on the F?
> >
> >Thanks for your help, again.
> >
> >Tom Cox
> >
> >[Non-text portions of this message have been removed]
> >
> >[Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
>
225/75R14 OD is nominally 27.3 inches - varies by brand but I've seen
27.05 and 27.62 inches both quoted. Coker quotes 235/75R14 at 27.87
inches.Old 1960 BFG Engineering Data shows 8.50-14 at 28.3 inches and
9.00-14 at 28.8 inches.
Drop of car will nominally be half the difference in diameter - but in
reality there is something else called a Static Loaded Radius that
controls the height - these numbers are rarely quoted but radials will
typically set lower than older bias tires of same diameter.
But first you have to find 225/75R14 - they have been out of production
since 2007 and after a lot of work I found 5 - 4 of 1 brand and a 5th
also made by Cooper but under different brand.
Most likely biggest you will find is 215/75R14 nominal 26.7 dia or
225/70R14 nominal 26.5 dia. - these are about 2 inches less diameter
which will reduce radius about 1 inch - but there is still the effect of
differences in the static loaded radius vs true radius - so figure a bit
more than 1 inch but not as much as 2 inches
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links
------------------------------------
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap