Re: [Chrysler300] 300F Flex Plate

["jean-yves chouinard" <jymopar@xxxxxxxxxxxxxxx>]

Tom.
If for a 300F, there is no flex plate . Torque converter bolts direcly to crankshaft flange. Flex plate is 62 and up only (aluminum case trans). Your F has the cast iron trans, no flex plate...
Jean-Yves.
  ----- Original Message ----- 
  From: tdcox@xxxxxxxxxxxxx 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Friday, November 28, 2008 1:38 PM
  Subject: [Chrysler300] 300F Flex Plate



  Need some help. Am ready to install rebuilt engine and transmission into the car. I have misplaced the flex plate that goes between the torque converter and the crankshaft. I have a friend that has these plates for the 65-67 mopars; are they the same as the earlier cars (60-62)? If not, does anyone have an extra? 
  Thank you. Happy Thanksgiving!!
  Tom Cox

  ___ 


  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/