[Chrysler300] Convertible question... 69-70

[mwl1967@xxxxxxx]

OK guys,
                While  dropping the top on my 70 300 rag I shattered the 
window in the new top. It had  been up and town maybe a half dozen times and then 
one day it was almost fully  down and I had pieces... there was a lot of stuff 
in the trunk at the time but I  don't recall anything being anywhere near the 
well liner that would have  impeded and broke the glass.
 
                My  top guy, upon closer inspection, noticed that the 
verticle braces, or  arms, that support the rear top bow seem bent. At the very least 
the one on  the right side doesn't have the same contour as the one on the 
left side of the  car. One has a gentle curve and one is more flat.  Also, on 
one of them the  factory rivet had been replaced with a large bolt. Those arms 
tended to rub  along the rear interior side trim panels and I didn't know if 
this should  be.
 
                Long  story short he wants to bend them so they're 
symmetrical and I'm hoping that  someone here with a nice fuselage bodied ragtop can 
e-mail some photos of those  arms to me. A photo from the inside of the car 
looking straight back at those  arms would show me the correct shape and allow me 
to heat and reshape  mine.  
 
Thanks so much,
Mike Laiserin
Phoenix, AZ



**************Wondering what's for Dinner Tonight? Get new twists on family 
favorites at AOL Food.      
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/