
Re: [Chrysler300] Curious about something regarding the dual carburetion
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] Curious about something regarding the dual carburetion????
- From: "Ron Stewart" <rstewart@xxxxxxxxxx>
- Date: Tue, 3 Apr 2007 17:54:55 -0400
on my mopars that had quads, all you had to was reverse the linkage, front to rear to make it straight linkage. factory settings were progessive. c300 ron
----- Original Message -----
From: Chrysler300E@xxxxxxx
To: chrysler300@xxxxxxxxxxxxxxx
Sent: Monday, April 02, 2007 10:50 PM
Subject: [Chrysler300] Curious about something regarding the dual carburetion????
Hi Everyone Out There in 300 Land:
Curious about something regarding the dual carburetion in the 300.
Have a 59 - she's nice, but I live in Miami and rarely have the opportunity
to get the car going faster than say 50 mph or so because of traffic. Stay
off the expressways as there are too many crazies down here. Anyway, I heard
that if you never engage the front 4bbl carb, it can gum up. I had both
rebuilt a few years ago and they work fine. But I was wondering, would it hurt
the engine or the carbs if you Gerry rigged the carbs such that they both
engage when you accelerate? This would be easy enough just playing with the
linkage. I can't think why there would be a problem as long as you don't step
on it in traffic!! Curious.
Tom
59 300E
Miami, FL
************************************** See what's free at http://www.aol.com.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap