Valve Gapping

["Vath, Michael J." <mjvath@xxxx>]

--on the subject of "feel", how tightly should the rockers grab the feeler gauge? Should the feeler be coated with oil for each measure?

Are "stepped" ("go, no-go") gauges the way to go?

Many thanks.

-----Original Message-----
From: Warren R Anderson [mailto:wranderson@xxxx]
Sent: Monday, February 03, 2003 2:34 PM
To: Chrysler 300 list service; obiwan10
Subject: [Chrysler300] P & G Valve Gapper
.....The
intention of the tool is to take some of the skill/feel out of adjusting
valves. This I think it does quite well and also in measuring absolute
travel does factor out one significant wear point; rocker arm tip wear. We
use electronically measured dwell to set ignition points for some of the
same reasons.

Warren Anderson
Sedona,AZ


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm 

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/