Hi, Harry: Just a brief review of current flow from the fuse to the blower. There is a combination of switches starting at the A/C pushbuttons. The pushbuttons switch on-off power to the speed switch on the temperature control lever. Speed control is accomplished by pulling the handle on the lever outward for faster or pushing it back in for slower. Any button other than OFF will send current flow to the switch. I’d suggest verifying +12VDC from the outlet of the HEAT/A/C fuse to the outlet of the pushbutton switch and to the outlet of the speed switch before pulling a good blower. Rich Barber Brentwood CA 1964 300K convertible From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Harry Torgeson Hi My heater and A/C fan quit working, already checked fuses OK, next step how do I replace it with a quality unit or rebuild, and how hard to replace? Harry Torgeson Thanks members -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/003201dc34d6%24593455c0%240b9d0140%24%40ez2.net. |
Back to the Home of the Forward Look Network
Archive Sitemap