Danny – I’m pretty sure that the square power steering pump decal wasn’t used after 1959. Ron From: chrysler-300-club-international@xxxxxxxxxxxxxxxx On Behalf Of dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx
Sent: Saturday, September 20, 2025 9:30 AM
To: dave mason <forwardlook300@xxxxxxxxx>
Cc: Tom Wilburn <tomwilburn1@xxxxxxxxx>; Chrysler300 <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} F/G decals - Air Cleaners placement - Dave and those who asked: Attached are the decals I bought from Sven. I reached out to him last night on another email I found for him, he has not yet replied. Sven maintains these are accurate for 1960, other years may be different. The decals on my F as shown in the second photo are placed exactly the way Sven specified. What does Sven know that we don't? Who knows? I tend to agree that the stickers went on, if at all, willy nilly, crooked and so on. I also agree that the antifreeze stickers most of us are using on F & G are wrong and come from mid to later 60's cars. Danny Plotkin
-----Original Message-----
From: "dave mason" <forwardlook300@xxxxxxxxx>
Sent: Friday, September 19, 2025 11:49pm
To: "Noel Hastalis" <cpaviper@xxxxxxxxxxx>
Cc: "Tom Wilburn" <tomwilburn1@xxxxxxxxx>, "Chrysler300" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>, dplotkin@xxxxxxxxxxxxxxxxxxxxxxxxx
Subject: Re: {Chrysler 300} F/G decals - Air Cleaners placement - Hi Noel- Yep thanks! This is how I’ve been doing the wing nuts and air cleaner decals. Was asking about the decals for anti-freeze etc, should have specified this. On the F it would seem they go on the valance, in whatever order you care to put them. So far, it seems Goers style decals are not exactly correct at least for 1960. Buncha minor stuff really, but if you’re going to do it, may as well do it right. Catching up on today's emails, here's my input on the F/G air cleaners' wingnuts and decals positioning. On my driver F, I haven't added the core support decals, so not commenting on those. First, here's my email exchange with our 300 Club's F/G consultant, Don Verity, on July 4, 2022 - Hi Noel, The air cleaner to carb wing nut would be bare metal. Don On the F & G air cleaners, a question on the 2 wing nuts on each air cleaner - - I know the wing nut on the stud that holds the air cleaner together is painted gold.
- Is the wing nut that holds the air cleaner to the carb painted gold or is it unpainted silver? My understanding is that this 2nd nut is unpainted, but I could well be wrong.
Second, the wingnuts Chrysler used at Jefferson Avenue were the 'open' style, with the wings themselves being slotted and not solid. We've had this discussion in the not-too-distant past. Third, the reasoning for the painted/unpainted wingnut pairs was that the air cleaners were first assembled and then painted gold, with the single wingnut installed. After the paint dried, the air cleaner decals were applied - all applied to the same location on the air cleaners - opposite the indent that's positioned to clear the vacuum unit on the right (passenger) side of the firewall. This properly positioned the right air cleaner's decal to face directly forward. And, since we know the installed air cleaners are angled differently right and left, the left (driver) side decal is necessarily facing outward to the left fender on that left side air cleaner, while the indent is facing inward, toward the center of the engine. Fourth, when the air cleaners were moved to installation on our motors, they were fastened to the carbs using unpainted wingnuts pulled from a parts bin. See the attached photos of my F's engine with the proper wingnuts and decals placement. Ignore the black-painted coil bracket that should be unpainted. 4 on the core support and 1 on each air cleaner? Tom Hopefully you all receive this. I bought water slide decals from Sven Andersson. He furnished the attached photos of an original car and directions. In my years with these cars most decals I see are wrong (late model antifreeze warning) and I cannot remember seeing any two alike. Also attached are the stickers on my F using Sven's instructions. Danny Plotkin
-----Original Message-----
From: "'dave mason' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, September 18, 2025 11:07pm
To: "Chrysler list server" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} F/G decals
<Chrysler 300 F decals 2.jpg> <Chrysler 300 F under hood decals.jpg> <Chrysler 300 F decals 1.jpg> --
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/D9F52E12-1F2D-4E16-A9AA-88FE98DB67AA%40gmail.com.  
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1758375008.685117244%40apps.rackspace.com.
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/000c01dc2a55%24db9034c0%2492b09e40%24%40comcast.net.
|
Back to the Home of the Forward Look Network
Archive Sitemap
